Led wall washing lamp, as the name implies, is a lamp that can make the light wash the wall like water; SOBO wall washing lamp is mainly used for decoration lighting and light effect beautification of construction projects, such as commercial buildings, hotel clubs, bridges and docks, and also for outlining large buildings.

　　Wall washing lamp is to adjust the bi-directional light point of view of LED light source through secondary light distribution to define its projection interval and focus uniformity from the beginning; SOBO wall washing lamp focuses on displaying the general appearance of the building from line to surface, which belongs to "surface light" from the perspective of light effect.

　　Tools / raw screw tools

　　The front work of the device shall be done according to the position of the lamps and power supply; the lighting point of the wall washing lamp shall be adjusted during the installation, and the lamps shall be fixed reliably with screws (see the following schematic diagram for details);

　　Connect the lamp with the power line firmly, and wrap the unnecessary line ends with waterproof tape; when connecting the device, the number of wall washing lamps in series shall be kept at about 5-6, so as to prevent the rear end voltage drop from being large when there is more series connection (see the following diagram for details);

　　After the completion of the device, please check the circuit of the device first, and after admitting that the device is correct and there is no electrical short circuit, connect the corresponding control power supply; if there is a problem in the device, please consult the professional technician of Sobel.

　　Note: during installation and repair, the wall washing lamp can only be operated when the power supply is cut off; the lamp is only suitable for installation on the surface of non combustible data, and the heat insulation pad or similar data cannot be covered on the surface of the lamp at any time.

　　 Zhongshan wall washing lamp http://www.hualinzhiguang.com/